Bucket-type belt bucket conveyers are intended for vertical transportation of grain and its products at grain collection and processing enterprises.
The belt bucket conveyer is manufactured in climatic version "У" of placement category 3 as per GOST 15150 to operate in enclosed premises with natural ventilation at ambient temperature from -40°С to +45°С.
The belt bucket conveyer is equipped with an explosion relief, belt reverse prevention mechanism, safety devices in accordance with requirements of “Safety Rules for Explosive Production Facilities for Storage and Processing of Plant Materials.”
No. |
Major parameters |
Unit of measure |
Bucket conveyer designation |
|||||||
У10-УН-I-2х20 |
У10-УН-I-10 |
У10-УН-I-20 |
У10-УН-II-50 | У10-УН-II-100 | У10-УН-II-175 | У10-УН-II-350 | У10-УН-II-500 | |||
1 |
Performance |
t/h |
2х20* |
10 |
20 |
50 | 100 | 175 | 350 | 500 |
2 |
Height by drum axles |
m |
4-45 |
4-45 |
4-45 |
4-60 | 4-60 | 4-60 | 7,3-60 | 7,3-60 |
3 |
Installed power |
kW |
4-7,5 |
3 |
4 |
7,5-11 | 11-12 | 22-45 | 30-75 | 37-90 |
4 |
Drum diameter |
mm |
500 |
400 |
500 |
630 | 750 | 1160 | 1160 | 1160 |
5 |
Drum length |
mm |
200 |
170 |
200 |
220 | 320 | 510 | 650 | 900 |
6 | Belt width | mm | 175 | 150 | 175 | 200 | 315 | 450 | 600 | 800 |
7 | Bucket installation pitch | mm | 260 | 260 | 260 | 190 | 227 | 210 | 190 | 190 |
8 | Belt speed | m/s | 1,8 | 1,4 | 1,8 | 2,5 | 2,9 | 2,4 | 3 | 3 |
9 | Finished section of bucket conveyer tubes | mm | 275*(2х242) | 197*197 | 232*232 | 275*275 | 373*257 | 597*377 | 750*480 | 1050*480 |
* There are 2 separate lines.
The service life of the bucket conveyer is at least 12 years.
The bucket conveyer consists of the following major assemblies:
The bucket conveyer is supplied disassembled according to the delivery set for the bucket conveyer.
The grain supplied to the bucket conveyer shoe tip gets on the belt with buckets passing through the grain layer in the shoe, is scooped up and moved to the bucket conveyer head. The grain pours out there from buckets centrifugally and “flows” to the outfeed manifold of the bucket conveyer head.