Hydraulic side truck unloaders РГБ (U10-RGB) are intended for unloading grain crops, grain products and other bulk materials through an open side board of vehicles and road trains.
The unloader is used at enterprises of Russia and the CIS.
The truck unloader is manufactured in climatic version "У" ("U") of category 1 as per GOST 15150, i.e. to operate outdoors in moderate climate.
No. |
Indicator name |
Unit of measure |
Designation |
|||
U10-RGB-M1(9) |
U10-RGB-M1(11) |
U10-RGB-1A |
U10-RGB-2 |
|||
1 |
Technical performance |
t/h |
150 |
250 |
440 |
|
2 |
Load-lifting capacity, no more than |
t |
35 |
45 |
56 |
50 |
3 |
Pad tilt angle |
degree |
38 |
|||
4 |
Pad tilt time, no more than |
sec. |
30 |
60 |
||
5 |
Pad lowering time, no more than |
sec. |
15 |
30 |
||
6 |
drive |
hydraulic |
||||
motor |
kW |
22 |
||||
gear pump |
NSH-100-2, left-hand GOST 8753 |
|||||
rated hydraulic pressure |
MPa (kgm/cm2) |
10(100) |
||||
hydraulic system capacity |
l |
400 |
500 |
|||
number of hydraulic jacks |
pcs |
2 |
4 |
|||
plunger diameter |
mm |
150 |
190 |
|||
plunger working stroke |
mm |
840 |
||||
7 |
Drive control type |
electrical, remote |
||||
8 |
Rated voltage in the power circuit |
V |
380 |
|||
9 |
Rated voltage in the control system |
V |
220 |
|||
10 |
Overall dimensions, no more than |
|||||
length |
mm |
9000 |
11000 |
18000 |
22000 |
|
width |
mm |
4450 |
4450 |
4450 |
4158 |
|
height |
mm |
2430 |
2430 |
2430 |
2430 |
|
11 |
Weight, no more than |
kg |
4266 |
5441 |
6560 |
10454 |
Item components and delivery set
Unloader U10-RGB consists of the following assemblies
The unloader is supplied to the customer in complete set, disassembled into components. Components, assembly units and parts are packed individually in wooden cases. Structural steel is supplied without packaging.
A vehicle with trailer drives onto the platform of the truck unloader. Side boards of the vehicle with the trailer open. On the control panel, the pump station is started, and the platform is lifted together with the vehicle. Through open side boards, the grain pours from the vehicle to the hopper located on the side of the truck unloader. After the grain completely pours from the vehicle, the pump station turns off and the platform with the vehicle lowers into the initial position, whereupon the vehicle drives from the truck unloader platform.
Side platform consisting of beams, two pads and adjusting levers. It is installed and attached under the receiving device. The pad is hinged with beams to adjusting levers. Cargo chains are attached to the pad to tilt it with two hydraulic lifters powered by the pump station. When tilting, the pad moves on supporting rollers on beam guides. Meanwhile, levers adjust motion of the pad.
The hydraulic system consists of the pump station, two hydraulic lifts and pipelines.