Hydraulic side truck unloader У10-РГБ

Hydraulic side truck unloaders РГБ are intended for unloading grain crops, grain products and other bulk materials through an open side board of vehicles and road trains.

The unloader is used at enterprises of Russia and the CIS.

The truck unloader is manufactured in climatic version "У" of category 1 as per GOST 15150, i.e. to operate outdoors in moderate climate.

Hydraulic side truck unloader У10-РГБ - фото - 3

Hydraulic side truck unloaders РГБ are intended for unloading grain crops, grain products and other bulk materials through an open side board of vehicles and road trains.

The unloader is used at enterprises of Russia and the CIS.

The truck unloader is manufactured in climatic version "У" of category 1 as per GOST 15150, i.e. to operate outdoors in moderate climate.

Major parameters and dimensions of the unloader are specified in the table:

No.

Indicator name

Unit of measure

Designation

У10-РГБ-М1(9)

У10-РГБ-М1(11)

У10-РГБ-1А

У10-РГБ-2

1

Technical performance

t/h

150

250

440

2

Load-lifting capacity, no more than

t

35

45

56

50

3

Pad tilt angle

degree

38

4

Pad tilt time, no more than

sec.

30

60

5

Pad lowering time, no more than

sec.

15

30

6

drive

 

hydraulic

motor

kW

22

gear pump

 

НШ-100-2, left-hand GOST 8753

rated hydraulic pressure

MPa (kgm/cm2)

10(100)

hydraulic system capacity

l

400

500

number of hydraulic jacks

pcs

2

4

plunger diameter

mm

150

190

plunger working stroke

mm

840

7

Drive control type

 

electrical, remote

8

Rated voltage in the power circuit

V

380

9

Rated voltage in the control system

V

220

10

Overall dimensions, no more than

   
 

length

mm

9000

11000

18000

22000

 

width

mm

4450

4450

4450

4158

 

height

mm

2430

2430

2430

2430

11

Weight, no more than

kg

4266

5441

6560

10454

Item components and delivery set

Unloader У10-РГБ consists of the following assemblies

  • of the side platform assembly;
  • hydraulic system;
  • control system.

The unloader is supplied to the customer in complete set, disassembled into components. Components, assembly units and parts are packed individually in wooden cases. Structural steel is supplied without packaging.

A vehicle with trailer drives onto the platform of the truck unloader. Side boards of the vehicle with the trailer open. On the control panel, the pump station is started, and the platform is lifted together with the vehicle. Through open side boards, the grain pours from the vehicle to the hopper located on the side of the truck unloader. After the grain completely pours from the vehicle, the pump station turns off and the platform with the vehicle lowers into the initial position, whereupon the vehicle drives from the truck unloader platform.

Side platform consisting of beams, two pads and adjusting levers. It is installed and attached under the receiving device. The pad is hinged with beams to adjusting levers. Cargo chains are attached to the pad to tilt it with two hydraulic lifters powered by the pump station. When tilting, the pad moves on supporting rollers on beam guides. Meanwhile, levers adjust motion of the pad.

The hydraulic system consists of the pump station, two hydraulic lifts and pipelines.

Person *
E-mail *
City
Comment *
Gallery

* - required fields

Contact us
Contact persom
Phone *
E-mail *
Your comment

JSC «Elevatormelmash» 2014

Address: Pushkin str., 79, Kropotkin,
Krasnodar territory, Russia, 352382
Opening hours: Mon-Fri 8: 00-17: 00, break 12: 00-13: 00, Sat-Sun: closed

 

The site was developed with the assistance of the export support coordination Center of the Krasnodar territory

 

Development and Marketing - WebCanape