- Main
- Elevator equipment
- Conveyers
- Drag chain conveyer with high paddles
Drag chain conveyer with high paddles
The drag chain conveyer with high paddles is intended for mechanical transportation of free-running grain products under permanent installation conditions horizontally and at an oblique angle up to 45°.
The drag chain conveyer can be installed both in enclosed premises and outdoors with ambient temperature range from -40°С to +45°С. When operating outdoors, the conveyer should have a special cover along the full length for protection against atmospheric precipitations
|
No. |
Parameter name |
Unit of measure |
У10-ТСЦ |
У10-КСЦ |
У10-КСЦ-50В |
У10-ТСЦ-60 |
У10-КСЦ-100М |
У10-КСЦ-200 |
|
1 |
Performance by grain |
t/hour |
4 |
6 |
50 |
60 |
100 |
200 |
|
2 |
Drive power at the maximum length |
kW |
2.2 |
3.0 |
15 |
5.5 |
11 |
30 |
|
3 |
Maximum tilt angle |
degree |
45 |
45 |
45 |
45 |
45 |
30 |
|
4 |
Duct width |
mm |
150 |
250 |
200 |
328 |
320 |
600 |
|
5 |
Chain type |
ТРД-38-3000-2-2-6-6 |
М112-2-100-1 |
ПР-38,1-12700 |
М112-2-100-1 |
М224-2-125-1 |
||
|
6 |
Maximum length |
m |
24.5 |
24.5 |
45 |
36 |
36 |
35 |
|
7 |
Chain speed |
m/sec. |
0.24 |
0.24 |
0.7 |
0.6 |
0.65 |
0.7 |
Dependence of the conveyer performance drop on the oblique angle of the sloping part of the conveyer (for free-flowing cargo):
- 10° - 85%
- 15° - 77%
- 20° - 65%
- 30° - 50%
- 45° - 35%
Item components and delivery set
The conveyer consists of the following major assemblies:
- Head section.
- Tension section.
- Ducts of the horizontal part of the conveyer.
- Ducts of the sloping part of the conveyer.
- Knee section.
- Paddled chain.
- Safety devices.
- Metalware, gaskets, brackets.
The conveyer is supplied partially disassembled according to the delivery set.
The conveyer is a fixed transportation device with a paddled chain as a working traction tool.
The principle of operation is based on the rotation of a looped chain with scrapers around the drive and idler sprockets. In the course of linear movement of the chain with scrapers in the box from the tension section to the drive section, the bulk load moves. At the end of the working branch (drive section) there is a branch pipe through which the transported product leaves the conveyor.
Contact us
