Permanent belt conveyer (sectionally dismountable)

The belt conveyer is intended for transportation of oil seeds, grain and its products, and other bulk materials horizontally or at an angle up to 5 degrees. The belt conveyer drive installed is either of foreign or Russian manufacture at the customer’s option.

The belt conveyer can be installed both in enclosed premises and outdoors with ambient temperature range from -40°С to +45°С. When operating outdoors, the conveyer should have a special cover along the full length for protection against atmospheric precipitations.

The belt conveyer can be used for operation at elevators, cereal reception points, and at other places for mechanical transportation of bulk materials.

Permanent belt conveyer (sectionally dismountable) - фото - 3

The belt conveyer is intended for transportation of oil seeds, grain and its products, and other bulk materials horizontally or at an angle up to 5 degrees. The belt conveyer drive installed is either of foreign or Russian manufacture at the customer’s option.

The belt conveyer can be installed both in enclosed premises and outdoors with ambient temperature range from -40°С to +45°С. When operating outdoors, the conveyer should have a special cover along the full length for protection against atmospheric precipitations.

The belt conveyer can be used for operation at elevators, cereal reception points, and at other places for mechanical transportation of bulk materials.

Major parameters and dimensions of the belt conveyer are specified in the table:

No.

Indicator name

Unit of measure

Conveyer name

У10-ТС-50

У10-ТС-65

У10-ТС-80

1

Performance (by grain) 

t/h

100

175

350

2

Belt width

mm

500

650

800

3

Length by drum axles, max

m

100

110

80

4

Installed power*

kW

5.5 - 11

5.5-22

7.5-30

5

Belt speed

m/s

2.3

2.2

2.3

*Maximum and minimum depending on the conveyer length.

You can fill in our online questionnaire, and we will get back to you as soon as possible

Item components and delivery set

  • the power-drive station completed, at the customer’s option, with a drive in form of gear motor of Russian or foreign manufacture, or with a belted motor.
  • tension section with the tension assembly in form of weights and screw tension.
  • of the center section.
  • roller supports with tilt angle 30°, 45° or 60°.
  • rollers.
  • holddowns, flat clamps, metalware.
  • conveyer belt.

Belt conveyer design.

The conveyer is a fixed transportation device of continuous operation with a conveyer belt as a working traction tool, which moves on rollers.

  • The power-drive station is a frame of welded structure made of angle steel, a drive drum is mounted on the frame. The driving drums are rotated by the gear motor or electric motor through V-belt drive.
  • The tension station is a welded frame made of angle steel. The following is mounted on the frame: tension drum with screw take-up or take-up by gravity.
  • Center sections of a welded structure consist of a roll-formed channel. Roller supports with rollers are installed on the frame.
  • Roller supports of the conveyer are intended for supporting of the cargo strand of the conveyer belt, for putting it into a channeled shape.

When turning on the power-drive station, the conveyer belt is moving on roller supports by transporting the load that is supplied thereto through the receiving tray. The product is dropped on the turn of the belt enveloping the drive drum.

ts_drawing
Person *
E-mail *
City
Comment *
Gallery

* - required fields

Contact us
Contact persom
Phone *
E-mail *
Your comment

JSC «Elevatormelmash» 2014

Address: Pushkin str., 79, Kropotkin,
Krasnodar territory, Russia, 352382
Opening hours: Mon-Fri 8: 00-17: 00, break 12: 00-13: 00, Sat-Sun: closed

 

The site was developed with the assistance of the export support coordination Center of the Krasnodar territory

 

Development and Marketing - WebCanape